20+
Commercial Projects
500K+
Sq Ft Delivered
0
Lost-Time Incidents
Complete Construction Process
A plaza, start to finish — every step, in the order it actually happens on site.
We Deliverd Commercial Services in Lahore, All over Pakistan. This is the full sequence we follow on a plaza or commercial building, from the first day of digging to the final coat of paint. Nothing is skipped, and no stage starts until the one before it is signed off.
Site Survey & Layout Marking
Before excavation and foundation work begins, we provide site setting-out and foundation marking services in Lahore, Pakistan to establish the building accurately on the plot according to the approved architectural and structural drawings.
Our team first verifies the plot boundaries, dimensions, setbacks, and building position against the sanctioned building plan. The required reference points are then established on the site, followed by accurate marking of the column grid, structural lines, wall positions, foundation lines, and other key construction points on the ground.
This initial setting-out stage helps ensure that construction starts at the correct location and that the foundation, columns, and walls are positioned according to the approved design. Any apparent discrepancy between the site conditions, plot dimensions, or approved drawings can be identified before excavation begins, allowing the required clarification or correction to be addressed at an early stage.
From plot verification and site measurements to grid setting, column marking, wall-line marking, and pre-excavation checks, we help establish a clear and accurate reference for the construction team before ground work starts.
Excavation / Digging
We carry out foundation excavation and footing work in Lahore, Pakistan according to the approved structural drawings and project requirements. Foundation trenches and footing pits are excavated to the specified dimensions and depths, ensuring that the foundation layout is accurately followed before concrete work begins.
Our construction team checks the excavation against the structural design, site levels, soil conditions, and specified soil-bearing capacity to help ensure that the foundation is suitable for the proposed building. The location, depth, width, and positioning of footing trenches are verified before proceeding to the next stage of construction.
Where required, site conditions are reviewed with the relevant structural and technical requirements so that any unexpected soil condition or variation from the planned excavation can be addressed before foundation work continues.
From foundation trench excavation and footing pit preparation to depth verification and pre-concrete inspection, we provide structured foundation construction services for residential and commercial projects in Lahore, Pakistan.
Anti-Termite Treatment
We provide pre-construction termite treatment in Lahore, Pakistan before foundation concrete is placed. The excavated soil and trench surfaces are treated with an appropriate anti-termite chemical solution to create a protective barrier against termites and other soil-dwelling pests.
This treatment is carried out at the foundation stage, including the excavated soil, foundation trenches, and relevant soil-contact areas, before concrete or other permanent construction work covers these surfaces. Proper application at this stage is important because areas beneath foundations become difficult to access once construction progresses.
Our team follows the specified treatment procedure and ensures the treated areas are ready for the next stage of foundation construction. The process can form an important part of residential and commercial building construction in Lahore, particularly where long-term protection of the building structure and interior spaces is required.
From foundation excavation and soil preparation to pre-construction termite treatment and coordination with foundation work, we help incorporate termite protection into the construction process before concrete is placed.
PCC — Lean Concrete Bed
We provide Plain Cement Concrete (PCC) work for foundations and footings in Lahore, Pakistan, placing a clean and level concrete layer at the base of each footing before reinforcement is installed. This PCC layer creates a firm, uniform working surface between the prepared soil and the reinforced concrete footing.
The PCC is laid to the specified thickness and level indicated in the structural drawings, helping provide a stable base for accurate placement of reinforcement steel. Before proceeding with reinforcement work, the surface is checked for proper levels, dimensions, and overall preparation of the footing area.
Using a properly prepared PCC base helps maintain the required reinforcement position and concrete cover, while also providing a cleaner construction surface for footing installation. This stage is carried out as part of the foundation construction sequence for both residential and commercial projects.
From footing excavation and soil preparation to PCC placement, leveling, and reinforcement preparation, we follow the specified construction sequence to support accurate and organized foundation work in Lahore, Pakistan.
Footing & Foundation Casting
We provide professional footing and foundation casting services in Lahore, Pakistan, following the approved structural drawings, reinforcement details, concrete specifications, and required construction procedures. This stage forms the structural base of the building and requires accurate execution to ensure the foundation is prepared correctly for the construction above.
Before concrete placement, our team checks the footing dimensions, reinforcement bars, spacing, lap lengths, concrete cover, levels, formwork, and embedded items against the structural drawings. The footing area is also checked to ensure it is properly prepared and ready for concrete placement.
Concrete is then placed in the specified footing and foundation elements using the required mix and construction method. Proper concrete compaction, leveling, and finishing are carried out to help minimize voids and achieve a uniform foundation element.
From reinforcement inspection and formwork checks to concrete placement, compaction, leveling, curing, and final inspection, we provide organized footing and foundation casting for residential and commercial construction projects in Lahore, Pakistan.
Backfilling & Plinth Level
We provide foundation backfilling and soil compaction services in Lahore, Pakistan after the foundation and required underground works have been completed. Excavated soil or approved backfill material is placed around the foundation in controlled layers and compacted properly to help create a stable and well-prepared ground surface.
The backfilling process is carried out progressively rather than placing a large quantity of soil at once. Each layer is spread, leveled, and compacted using suitable equipment and methods according to the project requirements. Proper compaction helps reduce excessive settlement and provides a more stable base for the construction work above.
The filled area is gradually brought up to the required plinth level, with levels checked during the process to maintain the planned building elevation and floor levels. Areas around foundation walls, footings, and other structural elements are handled carefully to avoid damaging completed work.
From foundation backfilling and layer-by-layer compaction to level checking and preparation up to plinth level, we provide organized groundwork services for residential and commercial construction projects in Lahore, Pakistan.
DPC — Damp-Proof Course
We provide Damp Proof Course (DPC) installation in Lahore, Pakistan as an essential moisture-protection stage in residential and commercial construction. A suitable waterproofing membrane or damp-proof layer is installed across the plinth level to help prevent moisture from the ground from rising through the walls and affecting the building above.
The DPC is installed at the specified level and with the required continuity across wall sections, junctions, and relevant areas. Before the next stage of masonry work proceeds, the installation is checked to ensure the damp-proof barrier is properly positioned and protected from damage during subsequent construction.
A correctly installed DPC helps reduce the risk of rising damp, wall moisture, peeling finishes, staining, and deterioration of plaster and interior surfaces caused by ground moisture. It is an important component of moisture control in building construction, particularly at the transition between the foundation/plinth and the walls.
From surface preparation and membrane placement to level verification and protection, we incorporate DPC installation into the foundation and masonry construction sequence for projects in Lahore, Pakistan.
RCC Column Casting
We provide reinforced concrete column construction in Lahore, Pakistan, following the approved structural drawings, reinforcement details, concrete specifications, and required construction sequence. Reinforced concrete columns form a key part of the building’s structural frame, transferring loads from beams, slabs, and upper floors down toward the foundation.
Before each column is cast, our team checks the column location, dimensions, reinforcement size and spacing, lap lengths, concrete cover, starter bars, vertical alignment, and formwork against the structural drawings. These checks help ensure that the columns are positioned accurately and prepared for concrete placement.
Columns are constructed floor by floor as the building progresses. Reinforcement steel is securely positioned, formwork is installed and aligned, and the specified concrete is placed and properly compacted to help achieve a dense and uniform structural element. After casting, appropriate curing and protection are carried out before the next stage of structural construction proceeds.
From reinforcement fixing and formwork to concrete casting, alignment, compaction, curing, and inspection, we provide structured reinforced concrete column construction for residential and commercial buildings in Lahore, Pakistan.
Beam & Slab Casting
We provide floor and roof slab construction services in Lahore, Pakistan, following the approved structural drawings, reinforcement details, slab thickness, concrete specifications, and required construction sequence. Reinforced concrete slabs form an important part of the building structure, connecting columns and beams while providing the structural floor and roof surfaces.
Before concrete is poured, the slab area is carefully prepared with shuttering/formwork and reinforcement steel according to the structural drawings. Our team checks slab levels, dimensions, reinforcement spacing, bar placement, concrete cover, openings, service sleeves, and formwork support before casting begins.
The specified concrete is then poured across the prepared slab and properly compacted, leveled, and finished to achieve a consistent structural surface. After casting, the slab is given appropriate curing and protection to support concrete strength development and help reduce premature drying and cracking.
From slab shuttering and reinforcement fixing to concrete casting, leveling, curing, and inspection, we provide complete floor and roof slab construction for residential and commercial projects in Lahore, Pakistan.
Brickwork / Masonry Walls
We provide infill wall construction services in Lahore, Pakistan, building partition and external walls between the reinforced concrete columns on each floor according to the approved architectural drawings and project layout. This stage transforms the structural frame into defined rooms, offices, corridors, commercial spaces, and other functional areas of the building.
Before masonry work begins, wall positions are carefully marked according to the floor plans, dimensions, openings, door and window locations, and structural grid. Walls are then constructed using the specified masonry materials and methods, with attention to alignment, level, verticality, and proper bonding.
The construction team coordinates wall work with the columns, beams, slabs, doors, windows, electrical conduits, plumbing services, and other MEP requirements to reduce unnecessary alterations later in the project. Required openings and service provisions are incorporated according to the drawings and site requirements.
From wall setting-out and masonry construction to alignment, openings, service coordination, and floor-by-floor completion, we provide organized infill wall construction for residential and commercial projects in Lahore, Pakistan.
Electrical & Plumbing Rough-In
We carry out concealed electrical and plumbing work in Lahore, Pakistan before walls and slabs are covered with plaster and finishing materials. Electrical conduits, wiring routes, plumbing pipes, and other required service lines are installed within designated wall chases, slabs, and concealed spaces according to the approved drawings and project requirements.
Before installation, service routes are coordinated with the architectural layout, structural elements, ceiling plans, electrical drawings, plumbing layouts, doors, windows, and interior requirements. This helps ensure that electrical points, switches, sockets, lighting connections, water supply lines, drainage pipes, and other services are positioned correctly before the walls are closed.
Our team carefully prepares wall chases and service pathways while taking care to avoid unnecessary interference with structural members. Electrical conduits and plumbing pipework are secured in position, and connections and routes are checked before plastering or other permanent finishes cover them.
From electrical conduit installation and wiring routes to concealed plumbing pipework, service coordination, inspection, and pre-plaster checks, we provide organized MEP installation for residential and commercial construction projects in Lahore, Pakistan.
Plastering — Internal & External
We provide professional wall and ceiling plastering services in Lahore, Pakistan, preparing interior and exterior surfaces for the next stage of finishing. Plaster is applied to the required walls and ceilings, including the front, rear, and relevant sides of the building, to create a smooth, even, and properly prepared surface for paint, texture, cladding, or other finishing materials.
Before plastering begins, surfaces are checked and prepared to ensure proper adhesion. Masonry joints, wall chases, service installations, corners, openings, and other relevant areas are reviewed before the plaster application. The plaster is then applied to the specified thickness and finished with attention to level, alignment, corners, edges, and surface uniformity.
Interior walls and ceilings are prepared for subsequent decorative finishes, while external plastering helps create a suitable base for exterior paint, weather-resistant coatings, stone, tile, or architectural cladding, depending on the approved design.
From surface preparation and plaster application to leveling, finishing, curing, and final surface checks, we provide wall and ceiling plastering for residential and commercial construction projects in Lahore, Pakistan.
Flooring & Tile Work
We provide complete floor screeding, tile, marble, and stone installation services in Lahore, Pakistan, preparing and finishing floors across residential and commercial buildings. This stage creates the finished flooring surfaces for rooms, corridors, entrances, balconies, terraces, and staircases according to the approved design and selected materials.
Before flooring installation, the base is properly prepared and screeded to achieve the required level, slope, thickness, and surface uniformity. The screed provides a suitable foundation for the final floor finish and helps establish consistent floor levels throughout the building.
Tiles, marble, or natural stone are then carefully laid according to the approved layout, pattern, dimensions, alignment, joints, and design requirements. Staircases receive particular attention to tread and riser dimensions, edge alignment, levels, and finishing details to achieve a consistent and safe installation.
From floor preparation and screeding to tile, marble, stone, and staircase installation, we provide complete flooring solutions for residential and commercial construction projects in Lahore, Pakistan.
Doors, Windows & Grills
We provide complete floor screeding, tile, marble, and stone installation services in Lahore, Pakistan, preparing and finishing floors across residential and commercial buildings. This stage creates the finished flooring surfaces for rooms, corridors, entrances, balconies, terraces, and staircases according to the approved design and selected materials.
Before flooring installation, the base is properly prepared and screeded to achieve the required level, slope, thickness, and surface uniformity. The screed provides a suitable foundation for the final floor finish and helps establish consistent floor levels throughout the building.
Tiles, marble, or natural stone are then carefully laid according to the approved layout, pattern, dimensions, alignment, joints, and design requirements. Staircases receive particular attention to tread and riser dimensions, edge alignment, levels, and finishing details to achieve a consistent and safe installation.
From floor preparation and screeding to tile, marble, stone, and staircase installation, we provide complete flooring solutions for residential and commercial construction projects in Lahore, Pakistan.
Elevation & Façade Work
We provide professional commercial front elevation finishing services in Lahore, Pakistan, transforming the street-facing façade of a plaza or commercial building into a visually appealing, durable, and well-coordinated exterior. The front elevation is finished according to the approved architectural design, selected materials, façade details, and overall project requirements.
Before finishing begins, the elevation surface is carefully prepared and checked for alignment, levels, openings, projections, and surface condition. Selected materials such as natural or engineered stone, exterior cladding, textured finishes, architectural paint, tiles, or other specified façade materials are then installed according to the approved elevation design.
Stone and cladding elements are accurately measured, aligned, fixed, and detailed around windows, doors, columns, slabs, parapets, and other architectural features. Where textured or exterior paint finishes are specified, surfaces are properly prepared to achieve consistent texture, coverage, color, and weather-resistant protection.
From surface preparation and material installation to façade detailing, finishing, alignment, and final inspection, we provide complete front elevation finishing solutions for commercial plazas and buildings in Lahore, Pakistan.
Painting & Wall Finishes
We provide professional interior and exterior painting services in Lahore, Pakistan, applying primer and final paint coats according to the approved architectural colour scheme, material palette, and project specifications. Proper surface preparation and systematic application help achieve a smooth, consistent, and durable finish throughout the building.
Before painting begins, walls, ceilings, columns, beams, façade surfaces, and other applicable areas are inspected and prepared. Dust, loose particles, surface imperfections, and minor defects are addressed before the appropriate primer coat is applied to improve paint adhesion, coverage, and overall finish quality.
After the primer has properly dried, the specified final coats of interior and exterior paint are applied according to the approved colour and material scheme. Different finishes may be used for living spaces, offices, commercial areas, ceilings, feature walls, and external façades based on the architectural and interior design requirements.
From surface preparation and primer application to final coats, colour matching, touch-ups, and finishing inspection, we provide complete painting solutions for residential and commercial construction projects in Lahore, Pakistan.
Electrical Fixtures & Sanitary Fittings
We provide complete electrical fixtures and sanitary ware installation services in Lahore, Pakistan, carried out after major painting, flooring, and finishing works are completed. This final-stage installation brings the building’s electrical, lighting, and bathroom systems into their finished and functional condition.
After paint and flooring works are complete, our team installs electrical switches, sockets, distribution panels, light fixtures, ceiling lights, fans, and other specified electrical accessories according to the approved electrical drawings and interior layout. Each fixture is positioned carefully to maintain proper alignment, accessibility, and coordination with ceilings, walls, furniture, and interior finishes.
Bathrooms and washrooms are completed with the installation of sanitary ware and plumbing fixtures, including toilets, wash basins, faucets, showers, mixers, floor drains, and other specified accessories.
From switches and electrical panels to lighting fixtures, bathroom sanitary ware, faucets, and final fixture connections, we provide coordinated finishing-stage installation for residential and commercial construction projects in Lahore, Pakistan.
Final Cleaning, Punch-List & Handover
We provide complete final cleaning, snagging, defect rectification, and project handover services in Lahore, Pakistan, ensuring the completed plaza is inspected, finished, and prepared for use.
After major construction activities are completed, construction debris, surplus materials, packaging, dust, and temporary works are removed from each floor, staircase, service area, and external space. Finished surfaces are cleaned carefully to protect newly installed flooring, glazing, fixtures, doors, façade finishes, and interior elements.
The final inspection also covers electrical fixtures, lighting, plumbing and sanitary ware, doors and windows, flooring, ceilings, paintwork, façade finishes, and other completed building components. Relevant systems and installations are checked for proper operation before the project moves to final handover.
From debris removal and floor-by-floor snagging to defect rectification, final inspection, documentation, and handover, we provide complete project close-out services for commercial plazas and construction projects in Lahore, Pakistan.
Ways to Engage Us
Three delivery models, depending on how much control you want over the trades.
General Contracting
BUILD TO YOUR DRAWINGS
- Bid against completed drawings
- Full trade subcontracting
- Fixed-price or cost-plus contract
- Weekly progress reporting
Design-Build
MOST REQUESTED
- Everything in General Contracting
- In-house architectural & MEP design
- Single contract, single point of accountability
- Faster permit-to-groundbreak timeline
Construction Management
OWNER-HELD CONTRACTS
- Trade contracts held directly by owner
- Scheduling & budget oversight
- On-site management & inspections
- Full transparency on trade pricing
Safety & Compliance
Every site runs to the same standard, regardless of trade or scope.
Site Safety Program
Daily toolbox talks, PPE enforcement, and a documented safety officer on every active site.
Contractor Standing
Fully licensed general contracting with bonding and insurance verified for every project scale.
Building & Fire Code
In-house code review before permit submission to catch conflicts before inspection does.
1-Year Workmanship
Full workmanship warranty on completed work, with a documented punch-list close-out.
General Liability
Full general liability and workers' comp coverage carried and verifiable on request.
Weekly Progress Reports
Photo-documented schedule and budget reporting sent weekly through project completion.
Office Fit-Outs
Full floor build-outs and interior renovations for corporate tenants, from shell space to move-in ready.
Retail & Showroom Construction
Storefronts and showroom interiors built to brand spec, sequenced to hit opening-day deadlines.
Warehouse & Industrial Facilities
Pre-engineered and tilt-up structures, loading infrastructure, and heavy MEP for logistics and light industry.
Restaurant & Hospitality Build-Outs
Commercial kitchens, dining floors, and back-of-house built to health code and equipment spec.
Renovation & Retrofit
Structural upgrades, seismic retrofits, and full renovations of existing commercial buildings, often occupied.
Tenant Improvements
Landlord and tenant-funded improvement work scoped to lease terms, coordinated with property management.
Frequently Asked Questions
1. What is the best commercial construction company in Lahore for plaza and commercial building projects?
The right commercial construction company in Lahore should be able to manage architectural design, structural works, grey structure, basement construction, MEP services, finishing, and project management under one coordinated process. Z. Construction & Designs provides complete commercial construction solutions from design to completion.
2. What is the commercial construction cost per square foot in Lahore in 2026?
Commercial construction cost per sq ft in Lahore varies according to the building design, covered area, number of floors, basement, structure, materials, and finishing specifications. A customized estimate is recommended because the cost can differ significantly from one project to another.
3. How much does commercial grey structure construction cost per sq ft in Lahore?
The commercial grey structure cost per sq ft depends on the structural design, number of floors, foundation requirements, steel and concrete quantities, and site conditions. A detailed BOQ and structural drawings provide a more accurate project-specific cost.
4. What is the cost of commercial basement construction per square foot in Lahore?
Commercial basement construction generally costs more than above-ground construction because it can involve excavation, retaining walls, waterproofing, dewatering, deeper foundations, and additional structural requirements. The final cost depends on soil conditions, basement depth, area, and structural design.
5. How much does it cost to construct a commercial plaza with a basement in Lahore?
The cost of a commercial plaza with a basement depends on the total covered area, plot size, number of floors, basement size, structural system, materials, MEP works, and finishing level. The most reliable way to determine the cost is through architectural and structural drawings followed by a detailed estimate.
6. What factors affect commercial construction cost per sq ft in Lahore?
Major factors include steel and cement prices, foundation design, number of floors, basement construction, covered area, architectural design, MEP systems, labour rates, finishing materials, site conditions, and project location
7. Does commercial construction cost more per sq ft than residential construction in Lahore?
Commercial construction can have a higher cost per sq ft because commercial buildings may require larger spans, stronger structural systems, heavier foundations, basements, elevators, specialized MEP systems, fire-safety provisions, and higher-specification finishes. The actual difference depends on the individual project.
8. What is included in commercial grey structure construction in Lahore?
Commercial grey structure construction generally includes excavation and foundations, reinforcement steel, concrete work, columns, beams, slabs, masonry, staircases, and other primary structural components. The exact scope should be defined in the project’s drawings, BOQ, and construction agreement.
9. How much does a complete turnkey commercial building cost per sq ft in Lahore?
A turnkey commercial construction cost per sq ft depends on the scope of work and finishing specifications. It can include architectural design, structural works, grey structure, electrical and plumbing systems, HVAC, flooring, ceilings, doors, windows, painting, façade, and other finishing works.
10. Which areas in Lahore have higher commercial construction costs per square foot?
Commercial construction costs can vary between areas because of differences in site access, labour availability, material transportation, building regulations, project requirements, and land or development conditions. Areas with premium commercial developments may also involve higher design and finishing specifications.
Send us the scope, and we'll come back with a schedule and a bid.
Share the project type, square footage, and target completion date — we’ll respond within business days.